The Microtek 8kw Grid Tie Inverter is a powerful and efficient solution for grid-tied solar systems. With a capacity of 8kw, this inverter seamlessly converts solar energy into usable electricity that can be fed back into the grid. It ensures high performance and reliable power output for residential and commercial installations. The Microtek 8kw Grid Tie Inverter allows you to maximize the energy generated by your solar panels while reducing your dependence on the grid. It is a reliable and cost-effective choice for those looking to harness the benefits of grid-tied solar power.
1. Integrated 8kw off-grid inverter and LiFePo4 battery module
2. Built-in Wi-Fi for mobile monitoring(Android/iOS APP is available)
3. Supports USB On-the-Go function
4. Reserved communication port for BMS (RS485, CAN-BUS or RS232)
5. Configurable AC/PV output usage timer and prioritization
6. Selectable high power charging current
7. Selectable input voltage range for home appliances and personal computers
8. Compatible to Utility Mains or generator input
9. Scalable LeFePo4 battery expension
10. IP20
For stock all in one off grid inverter from Microtek.
Energy Storage System-All in one 8kw Off-grid inverter with 5KWh scalable LiFePo4 battery pack | |
INVERTER Model | 8kw Off-grid inverter with 5KWh scalable LiFePo4 battery pack |
Rated Inverter Power | 8000VA/8000W |
INPUT | |
Voltage | 230VAC |
Selectable Voltage Range | 170-280 VAC(For Computers); 90 - 280 VAC(For Home Appliances) |
Frequency Range | 50 Hz/60 Hz(Auto sensing) |
OUTPUT | |
AC Voltage Regulation(Batt. Mode) | 230VAC ± 5% |
Surge Power | 16000VA |
Efficiency(Peak) | 93% |
Transfer Time | 15 ms (For Personal Computers), 20 ms (For Home Appliances) |
Waveform | Pure Sine Wave |
No Load Power Consumption | <75W |
SOLAR CHARGER & AC CHARGER | |
Solar Charger Type | MPPT |
Maximum PV Array Power | 8000W(4000W × 2) |
MPPT Range @ Operating Voltage | 90 ~ 450 VDC |
Maximum PV Array Open Circuit Voltage | 500 VDC |
Maximum Solar Charge Current | 150A |
Maximum AC Charge Current | 120A |
Maximum Charge Current | 150A |
PHYSICAL | |
Dimension, D×W×H (mm) | 214 × 621 × 500 |
Net Weight(kgs) | 25 |
STANDARD | |
Compliance Safety | IEC/EN 62109-1/-2, IEC/EN IEC 61000-6-4, IEC/EN IEC 61000-6-2,IEC/EN IEC 61000-3-12, IEC 61683 |
BATTERY MODULE | LiFePo4 Battery (scalable type) |
CAPACITY | 5000Wh |
PARAMETERS | |
Nominal Voltage | 51.2VDC |
Full Charge Voltage(FC) | 56V |
Full Discharge Voltage(FD) | 42V |
Typical Capacity | 100 Ah |
Max Continuous Discharing Current | 150A |
Max Discharing Current | 192A at 1 min |
Protection | BMS, breaker |
Charge Voltage | 56V |
Charge Current | 20A(0.2C) |
Maximum Charge Current | 50A(0.2C) |
Standard Charge Method | 0.2C CC(Constant current) charge to FC, CV (Constant voltage FC) charge till charge current decline to < 0.05C |
Inner Resistance | < 20m ohm |
Dimension, D×W×H (mm) | 214 × 621 × 550 |
Net Weight(kgs) | 55 |
STANDARD | |
Compliance Safety | IEC62619, EN61000-6-3. EN 61000-6-1, UKCA, UN38.3 |
(1) 8KW off-grid solar inverter + 1 PC 51.2V/100Ah, 5120Wh LiFePo4 battery module
(2) 8KW off-grid solar inverter + 2 PC 51.2V/100Ah, 5120Wh LiFePo4 battery module
8KW off-grid solar inverter and LiFePo4 product extension series:
(1) Single Phase 8KW Off-grid solar inverter+ 10.240KWH LiFePo4 batter pack
(2) Single Phase 8KW Off-grid solar inverter+ 15.360KWH LiFePo4 batter pack
(3) Single Phase 8KW Off-grid solar inverter+ 20.480KWH LiFePo4 batter pack
(4) Single Phase 16KW Off-grid solar inverter+ 20.480KWH LiFePo4 batter pack
(5) Split phase 16KW Off-grid solar inverter+ 40960KWH LiFePo4 batter pack
(5) Single phase 24KW Off-grid solar inverter+ 30.720KWH LiFePo4 batter pack
(6) Three Phase 24KW Off-grid solar inverter+ 30.720KWH LiFePo4 batter pack
Other All in one solar inverter you may have interest in